How to Connect

Setting up your InoDrive Demo Case:

1. First connect the ethernet cable to both your PC/Tablet/etc, and to your InoDrive. Either network port A or B will be fine. If your device does not have an ethernet port you can utilize a USB adapter.

2. Next connect the power cord to your InoDrive Module or to your InoDrive Demo Case, whichever you have in your possession and intend to use.

3. Next plug the power cord into the outlet. Ensure your InoDrive is connected properly to the power supply, the cables are secure and intact. Now you may flip the switch for power.

4. The LED lights on your InoDrive will come on and situate themselves as appropriate, you will see the Module and Network LED Lights stay on. Unless there is previous work saved on the InoDrive, the rest of the lights will be off once settled. In this depiction we can observe a blinking green LED application is loaded previously to the InoDrive. Ensure the light on the ethernet connection is blinking/on as well.

5. The InoDrive is now on and connected, you may proceed

Networking Notes

Step-by-Step Programs